THOMSON Grass Valley Kalypso Classic, Справочное руководство

Страница: 156 / 404

156 Kalypso Reference Manual
Section 2 — Control Panels
1-M/E Main Panel Reset
A reset button is located inside the lower Transition Lever Arm slot, besides
on the rear panel, permitting easy reset should the unit be installed in a
console or rack. The button can be pressed with a small screwdriver.
Macros Subpanel
On a 1-M/E Main panel the Macro buttons are located at the center left of
the panel (
Figure 93 ). See Macros Subpanel on page 131 for specific informa-
tion.
Figure 93. 1-M/E Macro Buttons
DPOP
The 1-M/E panel supports DPOP (Double Press Open) on a Menu panel or
PC that has been configured to operate with the 1-M/E panel. DPOP com-
mands are issued to the Menu IP address configured on the 1-M/E panel.
Note The 1-M/E Main panel should not be configured with the IP address of the
principle 4- or 2-M/E Menu panel. DPOP actions on the 1-M/E panel could
disrupt the main TD’s menu operations during production.
Inactive Controls in Release 11.0
• Built-in Menu (except to set display contrast)
• Menu Joystick Delegate subpanel controls, including the Joystick
The 1-M/E Main panel does not have a Machine Control subpanel. You can
use the External Device menus on the Menu panel to control external
devices.
8176_02_02_r0
Attach Attach
Enable
Enable
Show Show
Attach
Attach
Pre Pre
Attach
Attach
Repl Repl
Attach
Attach
Post Post
Attach
Attach
Delete Delete
Insert Insert
Delay
Delay
Rec Rec Show Show
Macro
Macro
Macro Macro
Deleg
Deleg
Macros
Subpanel
1-M/E Main Panel