THOMSON Grass Valley Kalypso Classic, Справочное руководство

Страница: 241 / 404

Kalypso Reference Manual 241
External Device E-MEM Menus
External Device Time Code Selection
On the External Device Enables menu you can specify what type of time-
code the Kalypso system will use with each device. The current time code
mode is displayed in the Time Code column (
Figure 156 on page 235 ). It is
assumed the controlled external device is operating with the same time
code type as selected.
Touching the
Time Code
data pad for a device opens a Timecode Mode
window ( Figure 162 ).
Figure 162. Time Code Mode Selection Window
Auto
— The controlled device returns the best source of timecode available.
At speeds less than 0.25 play Longitudinal Time Code (LTC) will be used if
it can be read. At these slow speeds if LTC is not found but Vertical Interval
Time Code (VITC) is available, VITC will be used. At speeds greater than
0.25 play, VITC will be used if it can be read. At these higher speeds if VITC
is not found but LTC is available, LTC will be used. At any speed, if neither
LTC or VITC is readable, Corrected LTC will be used, which is the last good
LTC time corrected by the tape timer.
LTC
— Longitudinal Time Code will be used.
VITC
— Vertical Interval Time Code will be used.
Tape Time
— The current zero based tape time setting of the controlled
device will be used.
Touching a time code button selects that type of time code for that device
and closes the Time Code Selection window.