TEL AFA4000/2, Инструкция по установке и эксплуатации

Страница: 142 / 177

AFA4000/2 Airflow Monitor / p.142
7. Select Slave ID , then press Mute .
8. Enter the required ID and press Mute .
9. Select Baud rate , then press Mute.
10. Select the required rate and press Mute .
11. Select Parity , then press Mute.
12. Select the required parity and press Mute .
13. Select Done , then press Mute.
To setup the AFA4 000’s BACNet settings:
1. From the Requires set up screen, press Mute , or from the Run Screen press and hold
the Mute button for 5 seconds until the Main Menu is displayed.
2. Select Set Up Monitor > Configure .
3. Enter the password (the factory default password is 0-0-0-0) and press Mute to
continue.
4. Select Protocol , then press Mute .
5. Select BACnet , then press Mute .
6. Select BACNet Settings and press Mute.
Parameter Description Range Default
A Device
Instance
Set the Slave ID for
the unit 0000000 to 4194303 0000000
B Station ID Set the network ID 0-127 1
C Baud rate Set the required Baud
Rate
•
1200
•
9600
•
38400
•
2400
•
14400
•
57600
• 4800 • 19200
38400
D Parity Set the required
Parity Non/ Even/ Odd None
E Max Masters Set the max masters
(max devices on the
network)
0-127 1
7. Select Device Instance , then press Mute .
8. Enter the required instance and press Mute .
9. Select Station ID , then press Mute. Enter the required ID and press Mute .