TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 134 / 192

Controlling with External Analog & Contact Signals
------------------------------------------------------------------------------------
130
Setting Procedures
Press The Function “FUNC.” key.
FUNC. lamp will light.
Settings Item Number (top) and parameters (bottom) will appear
in the Number Display
Select Item number 71 with the VOLTAGE dial.
Change the parameters with the CURRENT dial.
１＝External Voltage (０～１０Ｖ)
２＝External Resistance (０～∞Ω：Ａ)
３＝External Resistance (０～10kΩ：Ｂ)
４＝External Resistance (０～10kΩ：Ｃ)
Press the FUNC. key again to finish.
Returns the Number Display back to measurement display mode.
Canceling Output Voltage Current via External Voltage/Resistance
To cancel, select Item number 70 and set the parameter to 0 with the CURRENT dial.
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
OUTPUT PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80