TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 171 / 192

Calibration
------------------------------------------------------------------------------------
167
８ ． Press the FUNC. key and change the top Number
Display to Settings Item 30 with the VOLTAGE dial.
９． Adjust so that the digital multimeter (used for output
current measurement) displays the set value with the
CURRENT dial.
※See “Output Current Control with External
Resistance” on deriving the set value.
１０． Press the FUNC. key to complete offset calibration
of output current control with external resistance
(C).
１１．Set external resistance to “１００Ω”.
IN OUT
21 9
外部抵抗
０～１０ｋ
Ω
１２． Press the FUNC. key and change the top
Number Display to Settings Item 31 with the
VOLTAGE dial.
１３． Adjust so that the digital multimeter (used for
output current measurement) displays the set
value with the CURRENT dial.
※For deriving the set value see “Output Current
Control via External Resistance”.
１４． Press the FUNC. key to complete full-scale
calibration of output current control with
external resistance (C).
１５．This completes offset/full-scale calibration of
output current control with external resistance
(C).
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
External
Resistance
0～10kΩ