TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 165 / 192

Calibration
------------------------------------------------------------------------------------
161
８． Press the FUNC. key and change the top Number
Display to Settings Item 30 with the VOLTAGE dial.
９． Adjust so that the digital multimeter (used for output
voltage measurement) displays the set value with
the CURRENT dial.
※ See “Output Current Control with External
Voltage” on deriving the set value.
１０． Press the FUNC. key to complete offset
calibration of output current control with external
voltage.
１１． Set external voltage to “10.00Ｖ”.
IN OUT
4 20
外部電圧
０～１０Ｖ
１２． Press the FUNC. key and change the top Number
Display to Settings Item 31 with the VOLTAGE dial.
１３． Adjust so that the digital multimeter (used for
output current measurement) displays the set
value with the CURRENT dial.
※For deriving the set value see “Output Current
Control with External Voltage ”.
１４． Press the FUNC. key to complete full-scale
calibration of output current control with external
voltage.
１５． This completes offset/full-scale calibration of
output current control with external voltage.
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
External
Voltage
0～10V
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET