TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 93 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
89
SYSTem：COMMunicate：SERial[：RECeive]：PARity[：TYPE]
：Sets Parity
Function：Sets the parity
Same settings as FUNCTION Settings Item 62
Format：SYSTem：COMMunicate：SERial[：RECeive]：PARity[：TYPE] ＜String＞
Type：SET command, QUERY command
Parameters ODD ・・・・Odd number
ＥＶＥＮ・・・Even number
ＮＯＮＥ・・・None
Response: ODD、EVEN、NONE
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・While operating as a series operation slave unit
・While operating as a parallel operation slave unit
・ Sequence operation in progress
＜Ex.＞
SYST：COMM：SER：PAR ODD
SYST：COMM：SER：PAR？
ODD
SYSTem：COMMunicate：SERial：UNIT
：Sets Query Response Unit Load
Function：Sets whether to add-on units to the Query Response.
Format：SYSTem：COMMunicate：SERial：UNIT ＜Nrf＞
Type：SET command, QUERY command
Parameters： 0 ・・・Do not add units (Default Settings)
1 ・・・Add-on units
Response Same as parameters
Explanation： If set to “Add-on unit”, the units shown below will be added-on to the response.
V ・・Added to responses for Output Voltage Settings, OVP Settings, Voltmeter Measurement Query commands
A ・・Added to responses for Output Current Settings, OCP Settings, Ammeter Mesurement Query commands
W ・・Added to reponses for Power Measurement Query Commands
ｓ ・・Added to responses for Rising/Down Delay Time Setting Query Commands
Ω ・・Added to responses for Internal Resistance Setting Query Commands
bps・・・Added to responses for Bitrate Setting Queary Commands
＜Ex.＞
SYST：COMM：SER：UNIT 1
SYST：COMM：SER：UNIT？
1
VOLT？
640.0V
Setting changes via this command will take affect
from next startup.
Caution
