TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 61 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
57
Multiple Connections
The diagram below shows the connections for controlling multiple ZX Series power supplies with one computer.
By setting each individual address for the ZX Series power supplies, it is possible to control up to a maximum
of 31 devices with one RS232-C port.
Controlling ZX-S Series power supplies on multiple channels via computer
SERIAL I/F 1
SERIAL I/F 2
TERMINATION
LINE INPUT
OFF
ON
IN OUT
M/S CONTROL
SENSE
+
DC
OUTPUT
-
+ - SERIAL I/F 1
SERIAL I/F 2
TERMINATION
LINE INPUT
OFF
ON
IN OUT
M/S CONTROL
SENSE
+
DC OUTPUT
-
+ -
SERIAL I/F 1
SERIAL I/F 2
TERMINATION
LINE INPUT
OFF
ON
IN OUT
M/S CONTROL
SENSE
+
DC OUTPUT
-
+ -
TERMINATION
OFF
ON
TERMINATION
OFF
ON
TERMINATION
OFF
ON
※1.本機を複数台接続する場合は オプションケーブル（別売）
ＫＸＣ－３００（３００ｍｍ）またはＫＸＣ－６００（６００ｍｍ）
をご使用下さい。
パソコン等
ＺＸシリーズ ＃１ ＺＸシリーズ ＃２ ＺＸシリーズ ＃３１
KXC-300(※)
RS
-
2
3
2
C
ｸﾛ
ｽ
ｹ-
ﾌﾞﾙ
●When connecting multiple ZX-S Series power supplies, the communication terminal (computer, etc.) can only
connect to the SERIAL I/F 1 of only one device. Please set the device address for the ZX-S power supply
connecting to the termianl to 1.
●Settings can be done under FUNCTION Settings Item 60 “Device Address”.
●Please set the TERMINATION switch to OFF for when there is 2 SERIAL I/F 2 cable connections.
●Please set the TERMINATION switch to ON for when there is none or only one SERIAL I/F 2 cable connection.
RS
-
232C
Cross
C
able
Computer
※1. When connecting multiple ZX power supplies, use Option Cable
T485-**M(KXC-**M)
#1 #2 #31
Caution

T-485-**M