TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 111 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
107
Read-Back Commands
This sections explains about the Ex based command Read-Back commands.
ＴＫ０
：Read-Back Set Paramters
Function：Retrives the output voltage, output current, OVP voltage, OCP current, and output ON/OFF status
set in the ZX power supply with the specified device addess.
Format：ＴＫ０
Read-Back Format：Ａ＊１，ＭＶ＊２，ＭＣ＊３，ＬＶ＊４，ＬＣ＊５，ＯＴ＊６
＊１～＊６：Read-Back Value
Read-Back Value：
＊１：Device address of the responed ZX power supply
＊２：Output Voltage Set Value (Max. no. of decimal places is 2)
＊３：Output Current Set Value
(See page 105 “Output Current Ranges” for Max no. of decimal places )
＊４：OVP Voltage Set Values (Max. no. of decimal places is 2)
＊５：OCP Current Set Value
(See page 104 “OCP Current Ranges” for Max no. of decimal places )
＊６：Output ON/OFF Status
＜Ex.＞A1,TK0
A1,MV80.00,MC5.00,LV704.0,LC5.250,OT0
ＴＫ１
：Read-Back Measurement Data (Voltage/Current)
Function：Retrives measured voltage/current values from the ZX power supply with the specified device address
Format：ＴＫ１
Read-Back Format：Ａ＊１，＊２Ｖ，＊３Ａ
＊１～＊２：Read-Back value
Read-Back Value：
＊1：Device address of the responed ZX power supply
＊2：Output Voltage Set Value (Max. no. of decimal places is 2)
＊3：Output Current Set Value
(See page 105 “Output Current Ranges” for Max no. of decimal places )
＜Ex.＞A1,TK１
A1,0.00V,0.00A