TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 63 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
59
Accessing
Access Procedure
For controlling via communication commands, match the address assigned by the “Device Address Assign”
command with the device address, set under FUNCTION Settings Item 60 “Device Address”.
At this point, the front panel “REMOTE” LED will light and control via communication commands will be
granted. (hereinafter Remote Control Status). Simultaneously, control via the front panel will be taken away.
(See diagram below)
If the set device address differs with the address of the “Device Address Assign” command received, control
via communication commands from that point will be released.
Again, when controlling via communication commands, command controls will take affect once the device
address has been set with the “Device Address Assign” command.
When returning Local Control to the front panel from Remote Control Status, press the LOCAL key on the
front panel. The REMOTE LED will turn off and Local control with the front panel will be granted.
PC
RS-232C/RS-485
REMOTE LED turns on
Commnd send”Ａ１（ＣＲ＋ＬＦ）”
（Command example when EX series compatible.）
Device Address：１
Starting Remote Control
OUT PU T
PR ESE T OVP OCP
POWER
FU NC.
LOCA L
LOCK
D ISPLA Y
A B C
ST OR E
MEMORY
CC
CV
OU TPUT P OWER (%)
ST EP
PRESET FUNC. REMOTE LOCK
AL AR M RES ET
20 60 100 LMT 40 80
ZX-S-400L
VOLT AGE
ST EP
CUR REN T
OUT PU T PR ESE T OVP OCP
POWER
FU NC.
LOCA L
LOCK
DISPLA Y
A B C
ST OR E
MEMORY
CC
CV
OU TPUT P OWER (%)
ST EP
PRESET FUNC. REMOTE LOCK
AL AR M RES ET
20 60 100 LMT 40 80
Z X-S-400L
VOLT AGE
ST EP
CUR REN T
OUT PU T PR ESE T OVP OCP
POWER
FU NC.
LOCA L
LOCK
D ISPLA Y
A B C
ST OR E
MEMORY
CC
CV
OU TPUT P OWER (%)
ST EP
PRESET FUNC. REMOTE LOCK
AL AR M RES ET
20 60 100 LMT 40 80
Z X-S-400L
VOLT AGE
ST EP
CUR REN T
REMOTE LED turns on REMOTE LED turns off
Remote Control Status Local Control Status
Returning to Local Control from Remote Control