TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 31 / 192

Basic Operations
------------------------------------------------------------------------------------
27
Setting Output ＯＮ/ＯＦＦ Toggle Mode
It is possible to nullify the use of the OUTPUT key.
To do so, set the settings to 1, and when the POWER switch is turned ON, output will begin even if the OUTPUT
key is not pressed.
Setting Procedures
Press the Function ＦＵＮＣ key.
“FUNC.” Lamp lights.
The Setting Item Number will display on the top Number Display
and the parameter will be displayed in the bottom Number Display.
Select Item No. 51 with the ＶＯＬＴＡＧＥ dial.
Set Parameter to 0 or 1 with the ＣＵＲＲＥＮＴ dial.
Parameter＝０ Output is OFF （COLD START）after power
is turned on
Pressing the OUTPUT key will toggle it
ＯＮ/ＯＦＦ.
Parameter＝１ Output turns ON approximately 2 seconds after
power is turned on.
（HOT START）
Press the ＦＵＮＣ. key to finalize settings.
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET