TAKASAGO ZX-S-H Series, Инструкция по эксплуатации

Страница: 175 / 192

Calibration
------------------------------------------------------------------------------------
171
７． Press the PRESET key ① and set the CC set value
to “40.00A”（※） with the CURRENT dial ② and the
CV set value to “1.00V” with the VOLTAGE dial.
※For 400H/HA set to “5.000A”
For 800H/HA set to “10.00Ａ”
For 1600H/HA set to “20.00A”
(See Operating as Constant Current Power Supply
under Basic Operations on how.)
８． Press the PRESET key.
９． Press the FUNC. key and change the top Number
Display to Settings Item 27 with the VOLTAGE dial
to display the current measurement value at the
bottom.
１０． Adjust the measurement value displayed in the
bottom Number Display to the same value as
displayed in the digital multimeter (mV) (used for
output current measurement) with the CURRENT
dial.
１１． Press the FUNC. key to complete ammeter full-
scale calibration.
１２． This completes ammeter calibration.
Please return the CC and CV set values back to
normal before use.
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
Note: Bottom Number Display is
displayed in Ampere(Ａ).
OUTP UT
PR ESET OVP OCP
POWER
FU NC.
LOCA L
LOCK
DIS PLAY
A B C
ST OR E MEMOR Y
CC
CV
OU TPUT PO WE R (% )
ST EP
CURR ENT
ST EP
VOLTA GE
PRE SE T F UNC. RE M OTE L OC K
ALA RM R ESET
2 0 6 0 1 00 L MT 4 0 8 0
①
②
ZX-S-400 H