TAKASAGO ZX-S-H Series, Инструкция по эксплуатации, Страница: 51 / 192

Useful Function
------------------------------------------------------------------------------------
47
It may happen to have some minor change in output when OUTPUT ON, when OUTPUT setting change
during OUTPUT ON and when OUTPUT mode changing such as CV to CC or CC to CV.
It is recommended to set the Linearity Compensation to OFF, if there is any concern on the minor
change in output against the test specimen at load side.
Variation by output mode
CV mode：±（0.3%+300mV）for 400H/HA,800H/HA and 1600H/HA
CC mode：±（1.5%+15mA）for 400H/HA
±（1.5%+15mA）for 800H/HA
±（1.5%+30mA）for 1600H/HA
In the event of the previous corrected value is positive
(enlarged)
In the event of the previous corrected value is negative
(enlarged)
Latest output after setting the
Linearity Compensation
to OFF
＋
Previous correction value
Output corrected by the
Linearity Compensation
Latest output corrected
by the Linearity Compensation
In case of OUTPUT ON, OUTPUT
setting change
and OUTPUT mode changing
Time（ms）
1200ms
In case of OUTPUT ON, OUTPUT
setting change
and OUTPUT mode changing
Time（ms）
In case of OUTPUT ON, OUTPUT
setting change
and OUTPUT mode changing
Time（ms）
Output corrected by the
Linearity Compensation
Latest output after setting the
Linearity Compensation
to OFF
＋
Previous correction value
Latest output corrected
by the Linearity
Compensation
1200ms
Supplementary Information