manualshive.com logo in svg

Suzuki RM-Z250, Руководство по обслуживанию, Страница: 306 / 411

Поделиться
Скачать
Suzuki RM-Z250 Скачать руководство пользователя страница 306

17-4     FRONT AND REAR BRAKES

BRAKE FLUID AIR BLEEDING

• Remove the reservoir cap 

2

 by removing its bolts 

1

.

• Pour brake fluid up to the UPPER line 

A

.

 Specification and classification: DOT 4

* Brake fluid can be hazardous to humans and pets.

Brake fluid is harmful or fatal if swallowed, and
harmful if it comes in contact with your skin or eyes.

* Keep brake fluid away from children. Call your doc-

tor immediately if brake fluid is swallowed and
induce vomiting. Flush eyes or skin with water if
brake fluid gets in eyes or comes in contact with
skin.

* The use of any fluid except DOT 4 brake fluid from a

sealed container can damage the brake system and
lead to an accident.

* Use only DOT 4 brake fluid from sealed container.

Never use or mix different types of brake fluid.

* Spilled brake fluid can damage painted surfaces and

plastic parts.

* Be careful not to spill any brake fluid when servicing

brake fluid. Wipe spilled fluid up immediately.

Содержание RM-Z250




























































































































































































































































































































































































































Отзывы:

Нет отзывов