StorageWorks EK-SMRAB-IG, Руководство по установке

Страница: 70 / 84

Getting Started – RAID Array 310 V3.1 for HP–UX
C–14 EK–SMRAB–IG. B01
Figure C
−
4 Select the V31Z.IMG File
When the download completes, the utility displays the following message before
reprogramming the controller's program care:
CAUTION
Do not interrupt the power to the RAID subsystem while the
CLCP Utility reprograms the controller. The CLCP utility saves
the software in non-volatile RAM on the controller. Any
interruption of this procedure will result in the inability of the
subsystem to reboot.
KERMIT file transferred successfully.
Program card is being reprogrammed with new file.
*** Do not interrupt this step ***
Manufacturer code read from memory card= 8989
Device Code read from memory card= bdbd
10. If the main menu appears, press 0 to exit the utility.
11. Verify that this process successfully copied the new version of the software onto the
controller.
12. At the CLI prompt, type
:
HSZ20> show this_controller
The CLI displays information indicating the current software version of
the controller similar to the following:
Controller Model: HSZ20
Serial Number: CX54300265 Hardware version: A01
Software Version:V31Z-0
Informational Report
Instance Code: 0102030A
Last Failure Code:86000020 (No Last Failure Parameters)
HSZ20>show this_controller