StorageWorks EK-SMRAB-IG, Руководство по установке

Страница: 66 / 84

Getting Started – RAID Array 310 V3.1 for HP–UX
C–10 EK–SMRAB–IG. B01
The CLI displays information indicating the current software version of the controller
similar to the following:
Controller Model: HSZ20
Serial Number: CX54300265 Hardware version: A02(02)
Software Version:V31Z
Informational Report
Instance Code: 0102030A
Last Failure Code:86000020 (No Last Failure Parameters)
Controller:
HSZ20 CX54300265 Software V31Z, Hardware A02
Not configured for dual-redundancy
SCSI address 7
Time: NOT SET
Host Port:
SCSI target(s) (0, 1, 2, 3), Preferred target(s)
(0, 1, 2, 3)
TRANSFER_RATE_REQUESTED = 10MB
Cache:
16 megabyte write cache, version 2
Cache is GOOD
Battery is GOOD
No unflushed data in cache
CACHE_FLUSH_TIMER = DEFAULT (10 seconds)
CACHE_POLICY = A
Host Functionality Mode = A
.
C.5 Firmware Upgrade Procedures for Windows 95 and Windows NT 4.0
Before beginning, connect a serial line between the com port on your PC and the serial
port on the RAID Array 310. To begin upgrading the controller software, start and set
up the terminal emulation program as specified below:
1. Click the
Start button and cursor to the Program menu. At the right of the menu bar,
highlight Accessories.
2. To the right of Accessories, select Hyperterminal. Click the Hyperterminal menu to
create a new terminal session.
3. Enter
HSZ Term as the Connection Description name. Press the Tab key once and
select the OK icon.