STC SmartScanIS, Руководство пользователя

Страница: 257 / 391

EUD-2016026-00 Rev.2, SmartScanIS User’s Guide for Union Pacific, 14 January 2021
257
7 If you need to modify one or more of the five displayed lines of modem setup
commands, type
n
This prompt appears.
Enter line number to change (1-5):
There are five available lines for setup command data, each line having a maximum of
25 characters of data. Entry of a line number is followed by a prompt for entry of the
new modem setup data for the selected line number. Type in the desired modem
commands, pressing
[Enter] when done. If an entered command consumes the entire
25 characters of a line, the newly entered data is automatically saved upon entry of the
25th character. The contents of a line can be removed entirely by immediately
pressing
[Enter] when prompted for the new setup data. On the Modem Setup
submenu and on the System Status report, lines that have been cleared of data this
way will show the word Empty.
This screen fragment shows an example of erasing the fifth line of setup data.
Pressing
[Enter] to clear the fifth line is shown by [Enter] in the example.
Are the setup commands OK (Y/N)? n
Enter line number to change (1-5): 5
Enter new setup commands (25 characters max): [Enter]
Are the setup commands OK (Y/N)?
8 If you don't need to correct any of the five displayed lines of modem setup commands,
type
y
This prompt appears.
Do you want to initialize the modem now (Y/N)?
9 If you want to initialize the modem now, type y
The modem initialization routine uses the current modem setup data. A one-second
pause is placed between each line of setup commands as they are output to the
modem. Empty setup command lines aren't outputted to the modem. After the modem
is initialized, the Modem Setup submenu reappears.
10 If you don't want to initialize the modem now, type n
The Modem Setup submenu reappears.
11 To leave the Modem Setup submenu and return to the Setup menu, press [Esc] .
The Setup menu reappears.