STC SmartScanIS, Руководство пользователя

Страница: 238 / 391

238
14 January 2021, SmartScanIS User’s Guide for Union Pacific, EUD-2016026-00 Rev.2
a Be sure that the speaker (inside the SmartScanIS enclosure) is plugged in and that
its volume knob is turned to the middle position.
STC Integrated Detector System, Milepost-0501.2, Track:Single
05/31/2013
9:35
System Functions
-------------------------------------------------
A) Radio Test
B) Vocabulary Test
C) Gate Test
•
•
•
b From the System Functions menu, select Vocabulary Test .
If the system isn't currently making any other voice announcements, it begins the
vocabulary-test announcement. If the system is currently making a voice
announcement, the firmware waits until it is done to begin the vocabulary-test
announcement.
c If you hear nothing or the speech is too garbled to understand, call STC for help in
fixing this problem.
d Return to step 3 .
6 To execute the gate test:
Selection of the Gate Test option opens the scanner shutters and simulates a passing
train. While in this mode, you can simulate alarms by placing a heat source on a
scanner or by opening an auxiliary alarm detector's contacts.
You can stop the gate test by pressing [Esc] . If you don't press [Esc] , the test
continues until 486 axles are simulated. The firmware pauses between railcars and
scans for a pressed
[Esc] . Consequently, the gate test may not terminate immediately
after [Esc] is pressed. It may need to finish the current car's axles. Pressing keys
before pressing [Esc] results in the generation of additional cars of axles before
aborting. There will be one additional car of axles for each key pressed before
pressing
[Esc] .