STC SmartScanIS, Руководство пользователя

Страница: 251 / 391

EUD-2016026-00 Rev.2, SmartScanIS User’s Guide for Union Pacific, 14 January 2021
251
3 Select COM1-P9 to modify the COM1 serial port’s parameters.
A prompt like this appears.
Milepost-0501.2, Track:2
Serial Ports
COM1-P9
Tx-9600/Rx-9600 N-8-1
------------------------------------------------
A) Increase Tx Baud Rate
B) Decrease Tx Baud Rate
C) Increase Rx Baud Rate
D) Decrease Rx Baud Rate
X) Exit Menu
Parameter to change or Esc to quit?
Select the appropriate option to either increase or decrease the transmit or receive
baud rate for COM1. Depending on which letter you type and what baud rate was
displayed when you typed it, the baud rate changes to either the next or the prior value
from these values: 150, 300, 600,1200, 2400, 4800, 9600, and 19200. You can't
change the line setting of N-8-1.
a Type the letter of what you want to change.
The prompt reappears.
b If you aren't done changing the parameters for COM1, return to step a .
c If you are done changing the parameters for COM1, type x
4 Select COM2-P10 to modify the COM2 serial port’s parameters.
A prompt like this appears.
Milepost-0501.2, Track:2
Serial Ports
COM2-P10 Tx-9600/Rx-9600
N-8-1
------------------------------------------------
A) Increase Tx Baud Rate
B) Decrease Tx Baud Rate
C) Increase Rx Baud Rate
D) Decrease Rx Baud Rate
E) N-8-1
F) E-7-1
X) Exit Menu
Parameter to change or Esc to quit?
Select the appropriate option to increase or decrease the transmit or receive baud rate
for COM2. Depending on which letter you type and what baud rate was displayed
when you typed it, the baud rate changes to either the next or the prior value from
these values: 150, 300, 600,1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200. Select
N-8-1 for no parity bit, 8 data bits, and 1 stop bit. Select E-7-1 for even
parity bit, 7 data bits, and 1 stop bit.