Chapter 4. Configuring the Library
33
4.
If you want to secure front panel operations with a PIN code, proceed to
Changing the OCP PIN Using the RLC
, below.
If you do not want to add PIN protection to the OCP, proceed to Step 5.
5.
Select
Submit
, and the screen refreshes.
A pop-up window indicates an error changing the OCP PIN, but that the
password change was successful. There is no other confirmation that the change
was successful.
Changing the OCP PIN Using the RLC
A numeric PIN on the OCP provides an additional level of security for front panel
operations, such as media exchanges and library service operations. You can set and
change this PIN through the RLC, as described below.
1.
Select the OCP Access PIN Enabled checkbox to require that operations on the
front panel be PIN-protected.
2.
Type a new PIN in the OCP Access PIN Code field, then retype it in the Repeat
OCP Access PIN Code field.
The PIN must consist of exactly four numbers, with no letters or symbols.
3.
Select
Submit
. The screen refreshes, showing a notice at the bottom of the
screen that the changes will take effect after a reboot.
You can reboot the library through the RLC by selecting
Service > Reboot
.
Then, In the Library Reboot screen, click on the
Reboot
button.
You can also reboot the library manually by pushing the Power button on the
library’s front panel.
