If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it is possible
for the DVR to have more than one video stream in the same time range. In this case, the overlapping
time range in the record table will be separated by a yellow vertical line.
NOTE: The recorded data in the time range located after the yellow vertical line is the latest.
There are two view modes. Selecting (Standard view) or (Expanded view) located at the bottom
switches to the other view mode. Standard view displays combined recording information of all camera
channels currently displayed on the screen. Expanded view displays the recording information of each
camera channel currently displayed on the screen.
Selecting or located at the bottom zooms the record table. Selecting displays eight hours
(1-minute based), and selecting displays 24 hours (3-minute based) at once. To move to earlier or later
times that are not shown in the current record table screen, select the arrows located at the end of the times
by using the arrow buttons on the front panel or remote control.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range,
the recording status bar displays recording information in the following priority order: Panic
Æ
Pre-Event
Æ
Event
Æ
Time. The color of the bar indicates different recording modes: Red for Panic,
Yellow for Pre-Event, Purple for Event, and Blue for Time.
Selecting located at the bottom displays the Search menu.
Selecting located at the bottom displays the Calendar Search screen. Days with recorded video display
on the calendar with white numbers. You can highlight the days with recorded video by using the arrow
buttons. Once you have highlighted a day, press the button to select it. The first recorded image of the
selected date will pause on the screen. Once you have selected the date you want to search, review the
surrounding video by using the playback controls located at the bottom. Refer to the
Playing Recorded
Video
section of this chapter for information regarding playback controls.
Selecting located in top-left corner exits the Record Table Search screen.
Event Log Search
Figure 117 — Event Log Search screen.
