Highlight the desired box under the
Spot Monitor
heading, and press the button. A list of SPOT
monitors and cameras appears. Each SPOT monitor can be associated with a camera. The DVR will
display the associated camera on the SPOT monitor whenever it detects an input on the associated alarm
input.
You can save your Alarm-In changes by highlighting
Save
and pressing the
button. Selecting
Cancel
exits the screen without saving the changes.
Motion Detection Screen
Highlight
Motion Detection
in the Event menu and press the button. The Motion Detection setup
screen appears.
Figure 80 — Motion Detection Settings screen.
Your DVR has built-in video motion detection. Video motion detection can be turned On or Off for each
camera.
Highlighting the box under the
Sensitivity
heading and pressing the
button allows you to adjust the DVR’s sensitivity to motion for Daytime
and Nighttime independently. There are five settings with
1
being the
least sensitive and
5
being the most sensitive.
Figure 81 — Motion Detection Sensitivity screen.
You can adjust the minimum number of detection blocks that must be
activated to trigger a motion alarm. Highlighting the box under the
Min. Blocks
heading and pressing the
button allow you to adjust the
minimum number of detection blocks for Daytime and Nighttime
independently. Smaller numbers provide greater sensitivity because
fewer detection blocks must be activated.
Figure 82 — Motion Detection Min. Blocks screen.
