Figure 47 — LAN (ADSL) setup screen.
Highlight the box beside
ID
and press the button. A virtual keyboard appears allowing you to enter
the ID for ADSL connection.
Highlight the box beside
Password
and press the
button. A virtual keyboard appears allowing you to
enter the password for ADSL connection.
NOTE: Entering the
ID
and
Password
and highlighting
OK
reads the current IP address of the DVR
configured by the ADSL network.
NOTE: If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might
change whenever the unit is turned on.
Modem Setup
Highlight the
Modem
tab, and the Modem screen displays.
Figure 48 — Modem setup screen.
NOTE: If the RS232 port is in use for remote control, networking cannot be configured for a modem.
Highlight
Enable
and press the
button to toggle between On and Off. You will only be able to change
the settings if Modem is enabled.
