Siemens SIPROCESS UV600, Руководство пользователя, Страница: 91 / 186

Important functions (selection)
7.3 Calibration and validation functions
SIPROCESS UV600
Operating Instructions, 10/2013, A5E03529375-02
91
3.2 Validation ✓ See section Carrying out a
manual validation
measurement (Page 113)
3.2.x Measured component ✓
3.2.x.1 Zero point validation ✓
3.2.x.1.1 Results ✓
3.2.x.2 Reference point validation ✓
3.2.x.2.1 Results
3.2.x.3 Reference point calibration using
calibration cell
✓
3.2.x.3.1 Results ✓
3.2.x.10 Results ✓
3.2.x.10.1 Zero point ✓
3.2.x.10.2 Ref. point ✓
3.3 Calibration adjustment ✓
3.3.1 Measuring duration ✓ See section Setting the
measuring duration
(Page 92)
3.3.2 Sample gas purging time ✓ See section Setting the
sample gas purging time
(Page 93)
3.4 Group functions ✓ See section Group
functions (Page 118)
3.5 Settings ✓
3.5.1 Calibration gases ✓ See section Configuring
calibration gases (Page 98)
3.5.1.x Calibration gas ✓
3.5.1.x.1 Name ✓
3.5.1.x.2 Active ✓
3.5.1.x.3 Pump off ✓
3.5.1.x.4 Valve ✓
3.5.1.x.4.1 inv. DOn ✓
3.5.1.x.5 Use ✓
3.5.1.x.5.y Measured component ✓
3.5.1.x.5.y.1 Component ✓
3.5.1.x.5.y.2 Active ✓
3.5.1.x.5.y.3 Concentration ✓
3.5.1.x.5.y.4 Purging time ✓
3.5.1.x.5.y.5 As zero gas ✓
3.5.1.x.5.y.5.1 Val. zero point Y/N ✓
3.5.1.x.5.y.6 As ref. gas ✓
3.5.1.x.5.y.6.1 Val. ref. point Y/N ✓