Important functions (selection)
7.2 Diagnostics functions
SIPROCESS UV600
72
Operating Instructions, 10/2013, A5E03529375-02
Measured value status
Menu call:
Main menu → Diagnostics → Status → Measured values.
The following menu with the status of the individual measured values is then displayed
(example):
With real components (in the example: NO, NO2), the displayed status represents the signal
which is sent by the hardware which internally provides the measured signal for the
component (e.g. an analyzer module).
For virtual components (in the example: NOx), the status is a group status of all signal
sources from which the virtual component is calculated.
Module status
Menu call:
Main menu → Diagnostics → Status → Modules.
A menu with the status of the individual analyzer modules is then displayed. Depending on
the configuration, you can also display the status of individual details within the module, e.g.
as shown in the following menu.