Important functions (selection)
7.3 Calibration and validation functions
SIPROCESS UV600
102
Operating Instructions, 10/2013, A5E03529375-02
The following menu is displayed with the set digital outputs (example).
You can select the desired digital output using the
and
keys. Switch to the
follow-up menu for setting the switching logic using the
key.
The parameters have the following meanings:
Direct
The digital output is electronically activated (relay is pulled-up) if the source
is also in the logical activated status (open-circuit principle).
Inverted
The digital output is electronically activated if the source is in the logical
deactivated status (closed-circuit principle).
If the source is logical activated, the switching output is electronically in the
deactivated status (relay dropped-out)
Set the desired switching logic using the
,
and
keys.