Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 76

Страница: 76 / 238

System Operation

System Settings

/ 32

AXD3-340.620.13.01.02

Operator Manual

Manual tube assembly rotation

❏

During the rotational movement radiation release is not blocked.

❏

Outside the 0° rotation position, the automatic format collimation system
switches over to the “Manual” mode (free radiation field setting).

❏

Tube assembly rotation is possible from +90° to -90° with stop positions every
10° and from -90° to -180° with stop positions every 30°.

◆

Remove the compression cone if present.

◆

Pull the handle (1) to the front and hold it firmly.

◆

Turn the X-ray tube assembly to the required position and hold it firmly at rest.

◆

Press the handle towards the rear and allow it to engage.

◆

Check for lock-in by turning the tube assembly slightly to the left and right.

Moving the grid into / out of the beam path

Moving the grid into the beam path

◆

Press this key.
– LED lights up: the grid is in the beam path.

Moving the grid out of the beam path

◆

Press this key again.
– LED dark: the grid is moved out of the beam path.

(1)

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 76 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: