manualshive.com logo in svg

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 197 / 238

Поделиться
Скачать
Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 197

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

25 

/ 54

Removal

◆

Move the patient table to the horizontal position.

◆

Move locking handle on the rear of the footboard in arrow direction and hold 
fast.

◆

Pull the metal clip of the foot restraint out of the hole in the footboard.

◆

Loosen the straps.

◆

Lift the patient’s feet out of the foot restraint.

Control/care note

Check the foot restraints for correct condition at regular intervals of approx. 2 
months.

Check especially the firm seating of the fastening rivets, of supporting belts and 
closing belts, as well as the completeness of their seams and the condition of the 
leather for cracks and porous places.

Before using the foot restraint, always check that the safety device (3) is present. 
If this safety device is not present, then the foot restraint must not be used any 
more.

In case of defects to the foot restraint take this out of service and obtain a re-
placement through the Siemens Uptime Service.

We recommend using a commercially available impregnating pump spray for 
cleaning and care.

3

Содержание AXIOM Iconos R200















































































































































































































































Отзывы:

Нет отзывов