Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 213

Страница: 213 / 238

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 54

Attachment

◆

Move the patient table to the horizontal or vertical position as needed;

◆

If the table is not in the horizontal position, insert the BABIX holder into the
accessory rail, position it and secure it;

◆

Push and pull on the BABIX holder to ensure that it is seated properly;

◆

Bring the BABIX cradle with the secured infant into the examination room;

◆

Hang the BABIX-U cradle on the hook of the holder and position it for the ex-
amination.

◆

Place the BABIX-Flat cradle on the horizontal patient table in the examination
position.

Removal

◆

Remove the BABIX-U from the holder;

◆

Take the BABIX cradle with the infant out of the examination room and attend
to the infant;

◆

Hang the BABIX cradle on the corresponding BABIX rack and store appropri-
ately.

Radiation protection

value:

The attenuation equivalent of the BABIX cradle is

≤

1.6 mm Al.

Permissible load of the

BABIX cradle:

Size 600 mm: 6 kg
Size 700/800 mm: 10 kg
Size 1000 mm: 15 kg

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 213 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: