Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 188

Страница: 188 / 238

Accessories

Optional Accessories

/ 54

AXD3-340.620.13.01.02

Operator Manual

◆

Raise the leg supports to the examination position and adjust the position of
the legs inward or outward as needed.

◆

Tighten the cap screws (2).

◆

Pull and push on the leg supports and the flanges to ensure they are seated
properly.

◆

Place the leather pads over the center of the patient’s lower legs.

◆

Position the straps around the patient’s lower legs.

◆

Tighten the straps appropriately.

Removal

◆

Move the patient table to the horizontal position.

◆

Release the straps.

◆

Lift the patient’s legs from the leg supports.

◆

Wrap the straps around the leg supports.

◆

If necessary, remove the leg supports by loosening the cap screws (2).

◆

Loosen the cap screws (1).

◆

Remove the flanges from the accessory rails.

Note on biological compatibility

Please place towels between the patient’s legs and the knee crutches to avoid
direct skin contact with the knee crutches.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 188 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: