manualshive.com logo in svg

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 200 / 238

Поделиться
Скачать
Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 200

Accessories

Optional Accessories

28 

/ 54

AXD3-340.620.13.01.02

Operator Manual

◆

To set the height of the IV holder push the fixing ring (2) at the removable 
upper section of the IV holder upward (as shown above) and move the upper 
section to the desired height.

◆

To fix the height just release the fixing ring (2).

◆

Ensure that the height-adjustable rod is seated properly and secure.

◆

Hang one or more IV’s on the loops.

Removal

◆

Move the patient table to the horizontal position.

◆

Remove the IV’s.

◆

Push the fixing ring (2) at the removable upper section of the IV holder 
upward and move the upper section downward.

◆

Release the fixing ring (2).

◆

Ensure that the upper section and extension rod are secured.

◆

Loosen the cap screw (1).

◆

Lift the base of the IV holder from the accessory rail or slide it off the acces-
sory rail.

(2)

The IV holder can be used in system positions up to ± 20

o

.

Содержание AXIOM Iconos R200















































































































































































































































Отзывы:

Нет отзывов