Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 74

Страница: 74 / 238

System Operation

System Settings

/ 32

AXD3-340.620.13.01.02

Operator Manual

Cone arm in park

position

Under the following conditions no shadowing of the collimated format will result
from the cone arm in the park position:

❏

Max. 40 cm high, on the horizontal unit with orthogonal collimation and 150
cm SID.

❏

Max. 35 cm high, on the vertical unit with orthogonal collimation or oblique
projection in all unit positions from115 cm SID.

Reading the compression level

System remote

control console

◆

Read the indication on the display.

Monitor

◆

Read the indication at the bottom right on the monitor.

Tomographic equipment (optional)

(1) Mirror

(2) Scale

Setting the fulcrum height

The average fulcrum height (120 mm) is set automatically when the system is
switched on. Fulcrum heights of 10 mm - approx. 300 mm above the tabletop can
be set for cassette tomography and digital tomography.

◆

Press one of the keys:

Adjustment upwards;

Adjustment downwards.

(1)

(2)

AXIOM

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 74 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: