Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 226

Страница: 226 / 238

Accessories

Optional Accessories

/ 54

AXD3-340.620.13.01.02

Operator Manual

Storing the

compensating filter

in the wall holder

◆

Push the locking lever on the left accessory rail to the left.
– The locking lever on the accessory rail springs back to the right.

◆

Place the filter in a free compartment of the wall holder, turning the filter so
that the designation can normally be read from above.

Three-field templates

Use

For exposing the IONTOMAT ionization chambers on the object to be exposed.

The three-field templates are available as a complete set or individually for the fol-
lowing SIDs:

SID: 90 cm - 110 cm

SID: 110cm - 130cm

SID: 130cm - 175cm

SID: 175cm - 220cm

Using the three-field

templates

◆

Push the locking lever on the left accessory rail to the left.

◆

Slide the template into the collimator accessory rail in the correct direction for
exposing the ionization chamber.
– The locking lever on the accessory rail springs to the right.

◆

Check that the template sits firmly in the collimator.

◆

Expose the ionization chambers. To do so, switch on the light of the collima-
tor.

Storing the three-field

templates

◆

Push the locking lever on the left accessory rail to the left.

◆

Pull the template out of the accessory rails.
– The locking lever on the accessory rail springs to the right.

Store the three-field templates in a suitable location.

FFA 90 -110cm

36 - 42 ins. SID

FFA 110 - 130cm

42 - 50 ins. SID

FFA 130 - 175cm

50 -70 ins. SID

FFA 175 - 220cm

70 -90 ins. SID

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 226 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: