manualshive.com logo in svg

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 115 / 238

Поделиться
Скачать
Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 115

Examination

Digital Radiography

AXIOM Iconos R200

AXD3-340.620.13.01.02

31 

/ 52

Releasing the exposure

❏

Release the exposure with the exposure release button on the system remote 
control console or via the foot switch in the control room, or table-side (op-
tion). 

❏

Radiation is released long as long as you continue to press the exposure re-
lease button.

❏

The radiation ON indicators must light up.

Radiation interruption

If you let go of the exposure release button during radiation, the exposure is in-
terrupted immediately.

Exposure end

Letting go of the exposure release button , a full image memory or reaching the 
programmed maximum scene time ends the exposure series.

Examination procedure

Preparation

◆

Prepare the digital imaging system

◆

Move the tube assembly into the 0° position

◆

Position the patient

◆

Set a nominal source-image intensifier distance of 115 cm or 150 cm

◆

Bring the X-ray system and tabletop into the intended starting position.

You must ensure that the travel range for the X-ray system is sufficient.

◆

Press this key.
– The LED lights up: Periscanning is selected.
– Serialography is selected.

Warning

If these radiation ON indicators light up although no switch has been actuated 
and the current fluoroscopic image cannot be seen on the monitor:

◆

Switch the system off immediately!

◆

Notify the SIEMENS Uptime Service.

◆

Discontinue operation of the system.

DR

DR

The LEDs in the Periscanning and start keys flash if the conditions for exposure 
are not fulfilled.

Содержание AXIOM Iconos R200















































































































































































































































Отзывы:

Нет отзывов