Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 189

Страница: 189 / 238

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 54

Compression belt

Application

Used for patient compression during thoracic or abdominal examinations as well
as for immobilizing restless or very frail patients.

Attachment

◆

Move the patient table to the horizontal position.

◆

Position the patient on the table.

◆

Push the tensioning part of the compression belt into the required position
over the front accessory rail.

Make sure that all traces of contrast medium have been removed from the com-
pression belt. Otherwise, the X-ray image will show artifacts.
The compression belt is made of transparent plastic and can be cleaned with a
damp cloth.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 189 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: