Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 63

Страница: 63 / 238

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 32

System Operation

System Settings

General notes

Collision protection / Safety areas

❏

All system movements stop when a collision protection device is activated.

❏

The movement is stopped when a collision zone is reached.

3D support

❏

If the 3D support (optional) is not in its park position, then the system move-
ments are disabled.

This system movement is enabled by simultaneously actuating the bypass key
and an operating element.

◆

Press and hold this key

◆

Start the system movement after 2s.

Operating elements for system positions

❏

Operating elements with deadman functions

All operating elements for the system settings are designed as deadman func-
tion, i.e. system settings are active only as long as the operating element is actu-
ated.

❏

Operating elements with LEDs

LED lights up: function is selected

LED does not light up: function is deselected

LED flashes: selected function is not yet concluded or message about a particular
status (see relevant chapter for description).

Warning

Immediately press the nearest STOP button in the case of
danger to the patient.

All system movements are stopped.

◆

After removing the cause of the danger, unlock the STOP button by turning
it to the right.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 63 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: