Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 59

Страница: 59 / 238

System Operation

On-Off/Emergency Stop

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 32

In the case of a power failure

The imaging system remains switched on. The generator and table are switched
off. The green lamp on the control unit of the UPS goes out.

The red lamp on the control unit lights up after approx. 4 s.

◆

Now switch the system on within the next 6 s.

If the system is not switched back on within this time, then the imaging system
is shut down in a controlled manner and subsequently restarted.

After restoration of the power supply

The green and red lamps on the control unit of the UPS light up.

◆

Switch the system off.
– The imaging system remains switched on.
– The generator and table are switched off.

◆

Press the red button on the control unit (Press To toggle Power Supply).
– The red lamp on the control unit goes out.

◆

Switch the system on within the next 6 s.

If the system is not switched back on within this time, then the imaging system
is shut down in a controlled manner and subsequently restarted.

Red Emergency STOP button

STOP button on the unit

STOP button on the system remote control console

If there is an emergency situation that is potentially hazardous to the patient, the
operator or the system,

◆

Press one of the red stop buttons on your system.
– All system movements are stopped;
– The generator and the imaging system still remain switched on and ready;
– Radiation is interrupted;

fluoroscopy can be switched on again consciously after letting the foot-
switch go and actuating it again;

– Injection with the synchronized injector is interrupted.

STOP

AXIOM

STOP

Start

1,50

1,15

STOP

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 59 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: