Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 206

Страница: 206 / 238

Accessories

Optional Accessories

/ 54

AXD3-340.620.13.01.02

Operator Manual

Left: Releasing fluoroscopy Right: Releasing radiography

Releasing fluoroscopy

◆

Step on the right pedal (foot switch for fluoroscopy). Continue pressing down
on the pedal as long as fluoroscopy should remain active.

◆

Let go of the pedal.

❏

Fluoroscopy then ends.

Releasing radiography

◆

Step on the left pedal (foot switch for radiography). Continue to press down
on the pedal until the exposure has ended.

❏

The exposure has ended when the radiation ON indicator on the remote con-
trol console goes out.

◆

Let go of the pedal.

Removal

◆

Turn the locking ring on the cable plug to the left.

◆

Remove the plug from the receptacle.

◆

Roll up the foot switch cable.

◆

Store the foot switch and cable in an appropriate location.

Depending on the frequency of use, you can leave the foot switch attached or
disconnect it after the examination.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 206 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: