manualshive.com logo in svg

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 65 / 238

Поделиться
Скачать
Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 65

System Operation

System Settings

AXIOM Iconos R200 

AXD3-340.620.13.01.02

13 

/ 32

Behavior of the system settings in the case of a fault

If there is a fault while actuating one of the following movements

– tilting the table down/up
– moving the tabletop longitudinally
– moving the X-ray system transversely

then these movements are stopped and the fault is displayed as an error in the 
message line of the integrated generator control console and stored.

Cancelling the fault:

◆

Briefly press the exposure release button on the generator ON/OFF console 
up to the 1st pressure point and let go again. Don’t press more!.
– The fault is cancelled as a rule 

Actuating the same movement again

If a fault occurs again when the same movement is actuated, then these move-
ments are once again stopped and the fault is displayed as an error in the mes-
sage line of the integrated generator control console and stored.

Cancelling the fault:

◆

Briefly press the exposure release button on the generator ON/OFF console 
up to the 1st pressure point and let go again. Don’t press more!.
– The fault is cancelled as a rule by this

Actuating the same movement again

If the same movement is actuated again and there is a fault once again, then a 
warning signal (whistle) sounds and this movement is blocked. The following er-
ror message is displayed in the message line of the integrated generator control 
console:

“Severe error, please call service”

All other movements are possible only step by step. A warning signal (whistle) 
sounds on actuating and during the movement.

◆

Rescue the patient.

◆

Call the Siemens Uptime Service

Warning

Collision monitoring is inoperable.

The operator is responsible for avoiding collisions of the system with objects 
and the floor.

◆

Actuate system movements only with direct visual control.

Содержание AXIOM Iconos R200















































































































































































































































Отзывы:

Нет отзывов