Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 209

Страница: 209 / 238

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 54

◆

Insert the radiation shield in the front accessory rail and slide it to the appro-
priate work position.

◆

Tighten both cap screws.

◆

Push and pull on the radiation shield to ensure that it is seated properly.

◆

Tilt the radiation shield into a protective position.

❏

The radiation shield can be tilted inward on the accessory rail as well as out-
ward and all the way down.

Removal

◆

Move the patient table to the horizontal position.

◆

Tilt the radiation shield to the vertical position.

◆

Loosen both cap screws.

◆

Remove the lateral radiation shield from the front accessory rail.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 209 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: