Siemens AXIOM Iconos R200 Скачать руководство пользователя страница 196

Страница: 196 / 238

Accessories

Optional Accessories

/ 54

AXD3-340.620.13.01.02

Operator Manual

◆

Move locking handle (1) on the rear of the footboard in arrow direction and
hold fast.

◆

Insert the metal clip of the foot restraint (2) into the hole on the footboard pro-
vided for this purpose.

❏

When positioned correctly, the patient’s heels or toes should touch the pa-
tient table slightly.

◆

Release the locking handle.

◆

Check that the device is locked by pulling on the foot restraint.

Warning

To avoid spinal compression or in cases where the patient must be turned, the
shoulder supports cannot be used. The patient is held secure by the foot re-
straint only.

Содержание AXIOM Iconos R200















































































































































































































































Результаты поиска

Содержание AXIOM Iconos R200

Отзывы:

Siemens AXIOM Iconos R200, Руководство оператора, Страница: 196 / 238

Результаты поиска

Содержание AXIOM Iconos R200

Отзывы: