99
98
Oil change – replacing filter
The oil should be changed when the engine is warm.
Warning
: Use protective gloves.
- Position the bike vertically on a horizontal
surface.
- Place a container under the bike to catch
the old oil.
- Unscrew the drain plug
1
- Unscrew the drain plug
2
- Remove the pre-filter
3
- Let the oil flow out
- Unscrew the oil filter cap
4
- Remove the oil filter
- Let the oil flow out
Clean the plugs
1 – 2
with solvent
Clean and inspect the pre-filter
3
and change it if necessary
2
4
3
1
Warning
: The plugs must have new seals when they are replaced.
!
!
Checking oil level
Engine oil
Make sure that your bike is on its two wheels, vertical and on a horizontal surface.
Through the clutch sump window, check the level of engine oil as shown
in diagram
1
Warning
:
- Unscrew the filler cap
2
on the clutch engine oil sump,
- Top up using engine oil R4000 recommended by:
.
Adjust the level if necessary
The wrong level of oil can damage your engine.
Do not use your bike if the level is below the minimum.
1
2
Level with engine warm
Level with engine cold
!
