95
94
Cleaning the air filter
Warning
:
The air filter is vital to the correct operation of your bike, so it is important to take
good care of it. A clogged air filter reduces the performance of your bike,
increases fuel consumption and at the worst, dirt can enter into your engine and
cause premature wear and tear.
- To access the air filter:
- Loosen screw
1
on the seat by a quarter turn
counter clockswise.
- Pull the seat back towards the back of the bike.
Press part
B
towards the filter
C
to remove
part
B
from the electrical component sup-
port
D
.
C
C
D
B
1
!
Warning
: Make sure that your bike is vertical and on a horizontal surface.
- Place a container under the bike
- Remove the cap
5
(See page 93) and the screw
6
- Let the liquid flow out
- Replace the screw
6
with a new washer
- Tighten to 8 Nm
- Loosen the bleed screw
7
from the cylinder head
- Loosen the bleed screw
4
(See page 93) on the left radiator
Pour new coolant through the radiator filler
5
Radiator Liquid Ref : 500 .
As soon as liquid runs through the screw
7
without bubbles
- Replace the screw with a new washer and tighten to 8 Nm
- Continue filling
Once the level is reached (approx. 1.1 litres)
Put the bike standing on the side stand and recover the operations described
in the previous page.
7
!
6
filling
Emptying
Emptying, filling and bleeding the cooling system
