79
78
MAINTENANCE
Change oil, change filter and clean prefilter ( change if necessary)
ENGINE
Clean drain plug magnet
Replace spark plug (After 50 hours)
Check and adjust valve clearance
Check engine mounting bolts for tigtness
CARBURETOR
Clean carburetor manifold
Check cooling system for leaks, check quantity of anti freeze
ADD - ON P
A
R
T
S
Check exhaut system for leaks and fitment
Check cables for damage, smooth operation and bends adjust and lubricate
Check fluid level of the clutch master cylinder
Clean air filter and filter box
Check electric wires for damage and bends
Check function of electric systems
(low
, high beam, break light, indicator lamps, speedometer illumination, emergency OFF switch or button)
Check brake fluid, lining thickness, brake lining
BRAKE
Check brake lines for damage and leaks
Check / adjust smooth operation and free travel of handbrake / foot brake lever
Check tightness of brake system screws and leaks
CHASSIS
Check shock absorber and fork for leaks and function
Clean dust bellows
Bell fork legs
Check tigthness of general bolt and screw
WHEELS SPOKE
Check / adjust steering head bearings
Check joint tension and rim join
Check tyres and air pressure
Check chain, rear sprockets and chain guides for wear
, fit and tension
Lubricate chain
Check clearance of wheel bearings
1- service after
5 hours
After / every
20 hours
. .
. . . . .
.
.
.
.
.
.
.
. . . .
.
.
. .
. . . . . . .
.
.
. .
. . . .
.
.
.
.
. .
.
.
.
.
Maintenance
Fork
IMPOR
TANTI THE FOLLOWING CHECKS SOULD BE CARRIED OUT ONCE A YEAR !
IMPOR
TANT CHECKS AND MAINTENANCE TO BE CARRIED OUT BY THE RIDER
Absorber
Clean and grease steering head bearings and gasket elements
Replace glass fibre yarn filing of the exhaust main silencer
T
reat electric contacts and swiches with contact spray Protector 3 IPONE
Change hydraulic clutch fluid
Change brake fluid
Check oil level
Check brake fluid level
Check brake pads for wear
Check lights for function
Check horn for function
Lubricate and adjust cables / gaz
Bleed fork legs regulary
Remove and clean dust bellows regulary
Clean and lubricate chain, cheque tension and adjust if necessary
Clean air filter and filter box
Check tyres for pressure and wear
Check cooling fluid level
Check fuel lines for leaks
Check all control elements for smooth operation
Check brake performance
Treat bare metal parts Protector 3 IPONE (with the exception of brake and exhaut system)
Tr
eat
and steering locks and light swiches with contact spray P
ro
te
ct
o
r
3
I
PONE
Check tightness of screws, nuts and hose clamps regulary
SER
VICE SOULD BE DONE EVER
Y 20 HOURS IF MOTORCYCLE IS USED FOR COMPETITION THE SER
VICE SHOULD BE CARRIED OUT AFTER EVER
Y RACE !
SER
VICE INTER
V
ALLS SHOULD NEVER BE EXCEEDED BY MORE THAN 2 HOURS.
MAINTENANCE WORK DONE BY SHERCO AUTHORiZED WORKSSHOPS IS
NOT A SUBTITUTE OF CARE AND CHECKS DONE BY THE RIDER!
At least
once a year
Before each start
After every
cleaning
. . . . . . .
. .
.
. . . . .
.
.
.
.
. . .
.
.
.
.
