SEPTENTRIO Altus NR2 Скачать руководство пользователя страница 64

Страница: 64 / 81

12.5. USING THE PINPOINT-GIS APP

12.5 Using the PinPoint-GIS App

The PinPoint-GIS App allows you to use any GIS application you want in your mobile device.

This is achieved by overwriting the internal GPS position of your mobile device by the

accurate and reliable position of the Altus or Septentrio GNSS receivers.

PinPoint-GIS App offers the following features:

• Connection manager

• NTRIP Client (allowing multiple connections)

• GeoPod usb support so you can connect the Altus GeoPod product directly to your

mobile device

• Accuracy widget with level alarms for easy monitoring of the accuracy

• Location overriding so that you can use any other Android application while using the

high precision information from the Altus receivers

• Esri support (Beta)- It is a ﬁrst implementation of collection within the application itself

and it will allow accurate data collection into ArcGIS Online

• Basic GNSS control: WiFi, GSM

With the PinPoint-GIS App, you can choose to use either the internal cellular connection

of the Altus NR2, or the connection of your mobile device.

The diagrams above show

schematically the connection options.

The PinPoint-GIS App is an application which can be used along with any other Android

applications.

The application is designed to provide accurate positioning to any other

Android application running on your mobile device. A good example of this is the usage

with ArcGIS Collector which allows GIS collection directly into ArcGIS Online. Note that many

other Android applications could also be used in conjunction PinPoint-GIS App for maximum

ﬂexibility.

Содержание Altus NR2


















































































Результаты поиска

Содержание Altus NR2

Отзывы:

Похожие инструкции для Altus NR2

Бренды по названию

Популярные бренды

SEPTENTRIO Altus NR2, Руководство пользователя

Результаты поиска

Содержание Altus NR2

Отзывы:

Похожие инструкции для Altus NR2

Бренды по названию

Популярные бренды