ScanSoft PAGIS PRO 3.0, Руководство пользователя

Страница: 137 / 293

Using Pagis Pro
4–63
Index Contents
4. Specify whether you want page collation.
Click Collate Copies on if you are scanning more than one copy of
a multiple-page document. Pagis Pro then prints all document
copies in correct page order, one at a time.
5. Click the Color Copy checkbox on to make color copies.
If you have both a color scanner and a color printer, this checkbox
is available to you.
6. Click the Properties button to further fine-tune scanner
and page refinement settings.
For example, you might want to adjust scanner brightness, color
depth, or resolution, or turn on or off some of the page refinement
settings.
For complete information about Properties, refer to “Changing
default properties for scanned documents” earlier in this chapter.
Make copies
Use the following procedure to make copies:
1. Place the document to be copied in the scanner.
If you have a scanner with an automatic document feeder, you
can load a stack of pages. If you have a flatbed scanner, place the
first page of the document on the platen.
2. Click the Copy tool on the Pagis ToolBar.
This starts up the Pagis Scan Tool with the Copier tab in front
(refer to Figure 4–26).
☞
If you want to copy only a portion of the page, you can use the
Prescan button. For information about using Prescan, refer to an
earlier section, “Using Prescan to scan part of a document.”