Rohde & Schwarz ZNB20, Руководство пользователя

Страница: 337 / 1332

GUI Reference
R&S
®
ZNB/ZNBT
322 User Manual 1173.9163.02 ─ 38
5.4.2.2 Calibration Kits Dialog
The "Calibration Kits" dialog shows the available calibration kits for the different con-
nector types. It is also used for cal kit and cal kit file management.
Access: CHANNEL – CAL > "Cal Devices" > "Cal Kits..."
Related information
Refer to the following sections:
●
See also Chapter 4.5.2, "Calibration Standards and Calibration Kits" , on page 151
●
Chapter 4.5.2.4, "Cal Kit Files" , on page 156
●
Chapter 4.5.2.2, "Cal Kit Parameter Types" , on page 154
●
Chapter 5.4.2.1, "Cal Connector Types Dialog" , on page 319
The contents of the "Available Cal Kits" table vary, depending on the selected "Con-
nector Type". The table may also contain kits with ideal or typical parameter values;
see
Cal Kit Parameter Types . The "Agilent Model" is an optional scheme to character-
ize the offset parameters of the standards; see "Offset Parameters" on page 326.
Cal kit labels
Assigning a "Label" to user-defined calibration kits is optional. However, the label is
displayed in many dialogs and can provide useful information about the kit, e.g. its
serial number. It is even possible to assign several calibration kits with the same name,
distinguished by their label, to a common connector type. See also
Chapter 7.3.15.6,
"[SENSe:]CORRection:CKIT... with Labels" , on page 972.
Controls in the Calibration Kits Dialog
Cal Softtool