Getting Started
R&S
®
ZNB/ZNBT
58
User Manual 1173.9163.02 ─ 38
● Use "." and "-" to enter a decimal point or change the sign of the value.
● Use "G/n", "M/μ", "k/m", or "x1" to multiply the entered value with factors of
10
(-)9
, 10
(-)6
, 10
(-)3
or 1 and add the appropriate physical unit.
To enter a character string
1. Tap a character data input field to activate it.
2. Press the DATA ENTRY keys as if you were writing a short message on your
mobile phone.
● Press "0" to "9" once to enter the corresponding numbers.
● Use "." or "-" to enter a dot or a hyphen.
● Use "G/n", "M/μ", or "k/m" to enter the letters G, M or K (case-insensitive).
● Use the BACKSPACE key to correct wrong entries, deleting the character to
the left of the current cursor position.
● Press ENTER to complete an entry.
● Press ESC CANCEL to discard the entries made.
3. To enter letters other than G, M or K, you can also use one of the methods descri-
bed in the following sections:
●
Chapter 3.3.5.3, "Using the Analyzer's On-Screen Keyboard"
●
Chapter 3.3.5.4, "Using the Windows
3.3.5.2
Using the Numeric Editor
The "Numeric Editor" is a tool for convenient entry and modification of numeric values.
It is available for all numeric input fields in the "Vector Network Analyzer" (VNA) appli-
cation.
Operation with touchscreen or mouse:
1. Double-tap or double-click a numeric input field in a dialog or softtool panel to open
the numeric editor.
Operating the Instrument
