Rohde & Schwarz 1065.6000.20, Руководство по эксплуатации

Страница: 83 / 438

CALCulate Subsystem FSE
1065.6016.12 6.26 E-16
:CALCulate<1|2>:LIMit<1 to 8>:LOWer:STATe ON | OFF
This command defines the selected limit line as lower limit line.
Example:
":CALC:LIM:LOWer:STAT ON"
Features: *RST value: OFF
SCPI: conforming
Modes: A, VA, BTS, MS
The limit check is switched on with command
CALCulate:LIMit:STATe ON
. The result of the limit
check can be queried with
CALCulate:LIMit:FAIL?
.
:CALCulate<1|2>:LIMit<1 to 8>:LOWer:OFFSet <numeric_value>
This command defines an offset for the Y-axis of the selected relative lower limit line.
Example:
":CALC:LIM:LOW:OFFS 3dB"
Features: *RST value: 0
SCPI: device-specific
Modes: A, VA
:CALCulate<1|2>:LIMit<1 to 8>:LOWer:MARGin <numeric_value>
This command defines the margin of the selected lower limit line.
Example:
":CALC:LIM:LOW:MARG 10dB"
Features: *RST value: 0
SCPI: device-specific
Modes: A, VA, BTS, MS
:CALCulate<1|2>:LIMit<1 to 8>:LOWer:MODE RELative | ABSolute
This command selects the relative or absolute scaling for the Y-axis of the selected lower limit line.
Example:
":CALC:LIM:LOW:MODE REL"
Features: *RST value: ABSolute
SCPI: device-specific
Modes: A, VA, BTS, MS
:CALCulate<1|2>:LIMit<1 to 8>:LOWer:SHIFt <numeric_value>
This command shifts a limit line, which has relative values for the Y-axis (levels or linear units such
as volt).
Example:
":CALC:LIM:LOW:SHIF 20dB"
Features: *RST value: --
SCPI: device-specific
Modes: A, VA, BTS, MS
This command is an event which is why it is not assigned an *RST value and has no query.