manualshive.com logo in svg

Rohde & Schwarz 1065.6000.20, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz 1065.6000.20 Скачать руководство пользователя страница 193

MMEMory Subsystem                                                                                             FSE

1065.6016.12

6.136

E-16

:MMEMory:LOAD:AUTO    1,<file_name>

This command defines which device setting is automatically loaded after the instrument is switched
on.

Parameter:

<file_name> ::= DOS file name without extension;

FACTORY denotes the data set previously in the
instrument

Example:

":MMEM:LOAD:AUTO 1,’C:\USER\DATA\TEST’"

Features:

*RST value:

-

SCPI:

device-specific

Modes:

A, VA, BTS, MS

The contents of the file are read after switching on the instrument and used to define the new device
state. The file name includes indication of the path and may also include the drive. The path name
corresponds to the DOS conventions. This command is an event which is why it is not assigned an
*RST value and has no query.

:MMEMory:MDIRectory   <directory_name>

This command creates a new directory.

Parameter:

<directory_name>::= DOS path name

Example:

":MMEM:MDIR ’C:\USER\DATA’"

Features:

*RST value:

-

SCPI:

device-specific

Modes:

A, VA, BTS, MS

The file name includes indication of the path and may also include the drive. The path name
corresponds to the DOS conventions. This command is an event which is why it is not assigned an
*RST value and has no query.

:MMEMory:MOVE    <file_source>,<file_destination>

This command renames existing files.

Parameter:

<file_source>,<file_destination> ::= <file_name>
<file_name> ::= DOS file name

Example:

":MMEM:MOVE ’TEST01.CFG’,’SETUP.CFG’"

Features:

*RST value:

-

SCPI:

conforming

Modes:

A, VA, BTS, MS

The file name includes indication of the path and may also include the drive. The path name
corresponds to the DOS conventions. This command is an event which is why it is not assigned an
*RST value and has no query.

Содержание 1065.6000.20























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды